What do the tones of renowned guitarist such as Page, EVH and Johnson have in common? They all used the legendary echo machine EP-3 as a pre-amp.
We've captured that magic in a new Xotic Effects pedal, the EP Booster.

We've used the highest quality parts available with a discrete FET design and low impedance output, the EP Booster provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue. The internal DIP switches let you choose the boost frequencies, and EQ settings.

Housed in a small 3.5"x 1.5" x 1.5" case with blue LED and transparent knob, the EP Booster can be powered by 9-volt up to 18-volts.

A simple pure boost that pays reverence to the magical EP-3 and captures the celebrated tones of the world's most famous players.
The EP-Booster,great tone starts here!
 

Because of the Wah Pedal's rubber feet, it was difficult to mount it securely to the pedal board.The Wah Board Special will relieve you of any stress associated with a poorly mounted wah!! There is no need to modify the Wah and the mounting method is simple. It mounts directly on top of the original bottom panel.Recessed screw holes provide a smooth surface for mounting. Now there's nothing protruding, rubber feet or screws, to get in the way of the wah adhering solidly to the pedal board.

Available for both Cry Baby type and VOX (new) type as follows.

* Cry Baby type: JimDunlop, Cry Baby, Old Vox without AC Jack, Budda, RMC
* VOX New Type: New Vox with AC JackMSRP

From the popular brand "EWS", known for their Arion Chorus Modification, comes the new and groundbreaking fuzz/distortion effect pedal, "FUZZY DRIVE"!
As you crank up the gain control of the FUZZY DRIVE, you will have powerful fuzz/distortion and with the versatile tone control, you will have wide variety of sound at your fingertip. And when you lower the gain and crank up the volume, it can also be used as fuzz/booster "a la vintage Tone Bender" to enhance your amp distortion. As always, switches are true bypass freeing you of any worries of your tone thinning out when the pedal is not engaged.

Specs
Dimensions (W/D/H): 112 X 65 X 50 (mm) , 4.4 x 2.6 x 2.0 (inch)
Weight:240g (0.53 lbs)
True Bypass Switching
Power Consumption: 9VDC/ 7mA
BatteryType: 9VDC (006P) x 1
AC Adapter (Optional): 9VDC, Negative Tips (Regulated recommended)
Input Impedance: 1 M ohm
Output Impedance: less than 10k ohm

E.W.S. Subtle Volume Control or SVC is a device based on Scott Henderson’s idea, which provides better control of your overall volume than a traditional volume pedal. With subtle increases or decreases in volume, your audience may never realize that you’ve changed your volume.

The SVC goes in your amp effects loop. This allows you to control your volume without changing the gain you have dialed in at the front of the Preamp. The SVC can also be used between your last pedal and the front of the amp, but keeping your gain consistent while changing volume will not be as effective.

Because the SVC is not an effect, it does not require any power source such as batteries.

The SVC is designed to be placed on your pedal board and foot operated. Since the signal coming from the amp effects loop is low impedance, the cables running from the amp to the SVC will not degrade the sound.

I've heard this many times - during a live guitar solo, the bassist and drummer try to start the solo at a softer volume, while the guitar volume is much louder than it should be. Then by the end of the solo, the guitarist is completely drowned out by the band. Some guitarists use a traditional volume pedal to try to ride their solos to match the band, but because of the short throw of the pedal, their foot actions can easily be heard by the audience and it sounds very un-natural.
With the EWS SVC, changes in volume can be made in much smaller increments, giving you the ability to mix your live solos with the band just like they would sound on a mixed CD. Since the box is low impedance and placed in the amp effects loop, it'll only change your volume, not your gain. The potentiometer is only 25k ohms, so it can easily be chained to a traditional low impedance volume pedal used for faster swells and volume changes.
Enjoy!

more info coming soon